Ultraleather™

Great For: Automotive, Recreation, Marine, Healthcare, Dental, Office, Aviation, Hospitality, Residential

Recommended Ballpoint Pen Removal Instructions
• Wipe the stain off with isopropyl (rubbing alcohol) as soon as possible
• Rinse with water
• Air dry
*While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can
be removed.
Cleaning Guidelines
One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent
excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best.
Following these guidelines will help to extend the life of the fabric:
• Clean regularly with soap and water
• Wipe up spills as soon as they occur
• Lift most stains with an alcohol-based cleaner
• Disinfect using a 5:1 water/bleach solution*
• Thoroughly rinse all cleaning solution residue with water*
• Air dry*
* Recommended for stubborn stains and/or mildew.
Suggested Cleaners & Disinfectants
Asepticare® TB + II, Birex®, CaviCide®, Clorox® Disinfecting Wipes, DisCide®, LYSOL® Disinfectant, Viraguard®, and Virox® Accel TB, WD-40®,
Fantastik®
When using these cleaners, we strongly recommend rinsing the surface with clean water in order to remove any cleaning residue.
This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents
can be harmful to the surface appearance and lifespan of the product if not used properly. Ultrafabrics assumes no responsibility resulting from improper use of the cleaning agents.
Cleaning & Care Guidelines for Ultrafabrics® Brand Products
PLEASE NOTE: A variety of clothing and accessories may contain dyes that could transfer to lighter colors, depending upon variations in temperature
and humidity. Dye transfer is difficult to control, not always fully preventable, and may be irreversible. Ultrafabrics, LLC assumes no responsibility and
can not be held liable for dye transfer caused by external contaminants.

ISO 9001-CERTIFIED PRODUCTION FACILITY
COMPOSITION: 100% POLYURETHANE SURFACE WITH
100% REINFORCED RAYON BACKING
WEIGHT: APPROX. 9.7 OZ. PER SQUARE YD
(APPROX. 330 GRAMS PER SQUARE METRE)
APPROX. 14.6 OZ. PER LINEAR YD
(APPROX. 450 GRAMS PER LINEAR METRE)
THICKNESS: APPROX. 0.95 MM
WIDTH: 54 INCHES / 137 CENTIMETRES
PUT-UP: APPROX. 33 YDS / 30 METRES R.O.T.
CHARACTERISTICS (MEETS OR EXCEEDS)
ABRASION: ASTM D 4157 / 400,000 DOUBLE RUBS
BS 2543 / 180,000 RUBS (MARTINDALE)
TENSILE STRENGTH: ASTM D 1117
TEAR STRENGTH: ASTM D 1117
DIMENSIONAL CHANGE: ASTM D 3597
SEAM STRENGTH: ASTM D 751
STRETCH & SET: SAE J855
COLORFASTNESS
CROCKING: AATCC 8, CLASS 5 WET & DRY
LIGHT AATCC 16E, AATCC 16A, CLASS 5 ISO 105 - B02 : 1999 GRADE 7/8
GAS: AATCC 23, CLASS 5
OZONE: AATCC 109, CLASS 5
F/R RATING (HFR FREE)
ASTM E 84 (ADHERED) CLASS A
CA 117 E CLASS 1
FMVSS 302 & 95/28 ANNEX IV PASS
NFPA 260 CLASS 1
UFAC CLASS 1
• CAN BE TREATED TO MEET FAR SPECIFICATIONS.
• THIS FABRIC, WHEN TREATED AND/OR USED WITH OTHER COMPATIBLE FURNITURE
COMPONENTS, HAS BEEN SHOWN TO PERFORM WELL UNDER THE FIRE TEST CONDITIONS
OF CALIFORNIA TECHNICAL BULLETIN 133, BS 5852 PT 0, 1 & 5 (CRIB 5), IMO A.652 (16),
BS 7175 AND BS 5867 PART 2 TYPE B.